单词查询
mitered
美['mɑɪtəd]，英['mɑɪtəd]，
释义
「
」
n. 同“mitre”； 网络释义： 斜接的；
例句
The Donor boom tube was mitered using a Drill with a hole saw bit sized to fit head tube.
捐助热潮管mitered使用钻了孔位看到适合中小企业负责人管。
The limit of the thickness of the join on a mitered corner.
The drawing above shows a completely mitered seat stay.
The exact placement of the hole is 9. 8 inches measured from the non-mitered end and at dead center of the tubing.
作者的确切位置孔9.8英寸结束衡量从非斜接，并在管死的中心。
The tube is mitered on one end using a two-inch hole saw to reduce the length to 10. 8 inches.
导管是一对斜接最后用一两英寸的孔锯，以减少长度为10.8英寸。
The mitered angle of this cut is 66º
捐助热潮管mitered使用钻了孔位看到适合中小企业负责人管。
The limit of the thickness of the join on a mitered corner.
The drawing above shows a completely mitered seat stay.
The exact placement of the hole is 9. 8 inches measured from the non-mitered end and at dead center of the tubing.
作者的确切位置孔9.8英寸结束衡量从非斜接，并在管死的中心。
The tube is mitered on one end using a two-inch hole saw to reduce the length to 10. 8 inches.
导管是一对斜接最后用一两英寸的孔锯，以减少长度为10.8英寸。
The mitered angle of this cut is 66º