单词查询
pearlite
美['pəˌlaɪt]，英['pɜːlaɪt]，
释义
「
」
n. 珠光体；【冶】珠泽铁；珠层体；【地】珍珠岩； 网络释义： 波来铁；针尖组织；波来体；
例句
Unlike that of tempered martensite structure, there is little effect of oxygen content on the fatigue properties of ferrite-pearlite steel.
与调质回火马氏体组织不同，氧含量对铁素体-珠光体组织的疲劳性能没有明显的影响。
The lamellar cementite in the pearlite broke up and a large number of granular cementite precipitate on the ferrite boundaries.
在相邻铁素体界隅及边界上出现大量颗粒状和膜片状的渗碳体。
In conclusion, the fatigue properties of microstructure carefully controlled ferrite-pearlite steel could be as high as that of QT steel.
总之，组织精细控制的铁素体-珠光体型非调质钢的疲劳性能可达到调质钢的水平。
Too low content of pearlite after heat treatment was the main reason causing the K-9cranks to be rejected.
9曲拐质量不合格主要是由于热处理后，珠光体数量太少所引起。
And steel composed mostly of pearlite can be transformed into a hard steel.
Bainite also occurs during thermal treatments at cooling rates too fast for pearlite to form, yet not rapid enough to produce martensite.
贝氏体期间也发生在热处理冷却速度太快珍珠岩形式，还没有足够的迅速产生马氏体。
The microstructure of weld bead obtained by shielded metal arc welding are massive ferrite and a little pearlite, HAZ are lath bainitic.
手工电弧焊焊缝组织主要为块状铁素体和少量珠光体，热影响区组织为板条状贝氏体组织；
To sum up, the upper bainite characterize pearlite decomposition, while the lower bainite has the impression of martensite transformation.
从整体上看，上贝氏体具有某些珠光体分解的特征；而下贝氏体则具有马氏体相变的特征。
The relationship between the pearlite inter- lamellar spacing and deformed microstructure is also discussed.
同时对珠光体片层间距与变形组织的关系进行了分析讨论。
It was found by experiments thatboron increased the growth rate of pearlite, both in hypoeutectoid and eutectoid steels.
硼有加速珠光体成长率的作用，无论在亚共析或共析钢中皆有同样的现象产生。
与调质回火马氏体组织不同，氧含量对铁素体-珠光体组织的疲劳性能没有明显的影响。
The lamellar cementite in the pearlite broke up and a large number of granular cementite precipitate on the ferrite boundaries.
在相邻铁素体界隅及边界上出现大量颗粒状和膜片状的渗碳体。
In conclusion, the fatigue properties of microstructure carefully controlled ferrite-pearlite steel could be as high as that of QT steel.
总之，组织精细控制的铁素体-珠光体型非调质钢的疲劳性能可达到调质钢的水平。
Too low content of pearlite after heat treatment was the main reason causing the K-9cranks to be rejected.
9曲拐质量不合格主要是由于热处理后，珠光体数量太少所引起。
And steel composed mostly of pearlite can be transformed into a hard steel.
Bainite also occurs during thermal treatments at cooling rates too fast for pearlite to form, yet not rapid enough to produce martensite.
贝氏体期间也发生在热处理冷却速度太快珍珠岩形式，还没有足够的迅速产生马氏体。
The microstructure of weld bead obtained by shielded metal arc welding are massive ferrite and a little pearlite, HAZ are lath bainitic.
手工电弧焊焊缝组织主要为块状铁素体和少量珠光体，热影响区组织为板条状贝氏体组织；
To sum up, the upper bainite characterize pearlite decomposition, while the lower bainite has the impression of martensite transformation.
从整体上看，上贝氏体具有某些珠光体分解的特征；而下贝氏体则具有马氏体相变的特征。
The relationship between the pearlite inter- lamellar spacing and deformed microstructure is also discussed.
同时对珠光体片层间距与变形组织的关系进行了分析讨论。
It was found by experiments thatboron increased the growth rate of pearlite, both in hypoeutectoid and eutectoid steels.
硼有加速珠光体成长率的作用，无论在亚共析或共析钢中皆有同样的现象产生。