单词查询
laminations
美[ˌlæmə'neɪʃən]，英[ˌlæmɪ'neɪʃən]，
释义
「
」
n. 同“lamina”；层压；叠合；【电】叠片； 网络释义： 铁芯片；绕线结构；层合；
例句
The stator has a set of stator laminations and a set of windings held in position by the set of stator laminations.
定子具有一组定子叠片和通过该组定子叠片保持在合适位置的一组绕组。
The rotor shall not touch the end frames, stator laminations, winding or any other lead or connection.
转子不应触及端盖，定子迭片，绕线，任何其他的引线，或接头。
This specification covers silicon steel (approximately 2% silicon) for use in motor, dynamo, contactor and miscellaneous relay laminations.
此规格包括硅钢（大约2%的硅）使用在发动机，发电机，接触器和不同种类的继电器叠片上。
Paste board: Board made from several laminations of thinner sheets. Contrast to Homogenous board.
裱糊纸板：用多张较薄纸板裱贴而成的纸板。有别于均质纸板。
All plates should be free from rust, mill scale, pitting and free of laminations.
所有的钢板必须防锈，防磨刻，防腐蚀及无迭片工艺。
This specification covers preselected electrical steel for use as laminations in Relays and Contactors.
此规格包括了预选的迭片结构的铁芯硅钢用于继电器和接触器上。
This specification covers a preselected electrical steel for use as laminations in Relays and Contactors.
此规格涵盖了预选电炉钢用作叠片放在继电器和接触器上。
The laminations are usually bonded together by adhesives, but other forces could be used, such as those provided by welding.
迭片通常是由粘合剂连接在一起的，但是焊接力也是需要的。
定子具有一组定子叠片和通过该组定子叠片保持在合适位置的一组绕组。
The rotor shall not touch the end frames, stator laminations, winding or any other lead or connection.
转子不应触及端盖，定子迭片，绕线，任何其他的引线，或接头。
This specification covers silicon steel (approximately 2% silicon) for use in motor, dynamo, contactor and miscellaneous relay laminations.
此规格包括硅钢（大约2%的硅）使用在发动机，发电机，接触器和不同种类的继电器叠片上。
Paste board: Board made from several laminations of thinner sheets. Contrast to Homogenous board.
裱糊纸板：用多张较薄纸板裱贴而成的纸板。有别于均质纸板。
All plates should be free from rust, mill scale, pitting and free of laminations.
所有的钢板必须防锈，防磨刻，防腐蚀及无迭片工艺。
This specification covers preselected electrical steel for use as laminations in Relays and Contactors.
此规格包括了预选的迭片结构的铁芯硅钢用于继电器和接触器上。
This specification covers a preselected electrical steel for use as laminations in Relays and Contactors.
此规格涵盖了预选电炉钢用作叠片放在继电器和接触器上。
The laminations are usually bonded together by adhesives, but other forces could be used, such as those provided by welding.
迭片通常是由粘合剂连接在一起的，但是焊接力也是需要的。